Address:Haoyue Road Luyuan District,Changchun City, 
Jilin Province ,P. R. China
Email:sales@ocean-opto.com
Tel:+86-431-87675449- Copyright © Ocean Opto Co.,LTD. all rights copyright
 
PBS Cube can be used as polarizers, beamsplitters or beam combiners. The output beam which are parallel to input beam is called p-polarized beam while the orthogonal output beam is defined as s-polarized beam.
or all kinds of Polarizing Beamsplitter Cube, the smallest size we can supply is 0.8x0.8x0.8mm.
Broadband Polarizing Beamsplitter Cube Design
Characteristic:
•Transmitted Beam Extinction Ratio: >1000:1
•Four Wavelength Ranges Available

Specifications:
Cube Size  | 5mm Cube, 10mm Cube, 12.7 mm Cube, 20 mm Cube, 25.4 mm Cube, upon request  | |||
Wavelength Range  | 420 - 680 nm  | 620 -1000 nm  | 900 – 1300 nm  | 1200 - 1600 nm  | 
Substrate  | H-ZF3/N-SF1  | |||
Extinction Ratio  | Tp:Ts> 1000:1  | |||
Principal Transmittance  | Tp >90%  | |||
Principal Reflectance  | Rs >99%  | |||
Reflected Beam Deviation  | 90° ± 5 arcmin  | |||
Transmitted Beam Deviation  | < 5 arcmin  | |||
AR-Coating Reflection  | Ravg<0.5% @ 0 degree AOI all input and output face  | |||
Dimension Tolerance  | +/- 0.2mm  | |||
Surface Quality  | 40-20 scratch and dig  | |||
Surface Flatness  | λ/4 up to λ/8 @ 633 nm  | |||
Transmitted Wavefront Error  | < λ/4 @ 633 nm  | |||
Clear Aperture  | >80%  | |||
Single Wavelength Polarizing Beamsplitter Cube  Design       
Characteristic: 
• Transmitted Beam Extinction Ratio: >3000:1 
• Several Wavelength Available 
Specifications: 
Cube Size  | 5mm Cube, 10mm Cube, 12.7 mm Cube, 20 mm Cube, 25.4 mm Cube, upon request  | 
Wavelength (nm)  | 532, 633, 670, 780, 850, 980, 1064, 1550, etc.  | 
Substrate  | UV Fused Silica  | 
Extinction Ratio  | Tp:Ts> 3000:1  | 
Principal Transmittance  | Tp >95%  | 
Principal Reflectance  | Rs >99%  | 
Reflected Beam Deviation  | 90° ± 5 arcmin  | 
Transmitted Beam Deviation  | < 5 arcmin  | 
AR-Coating Reflection  | R<0.25% @ 0 degree AOI all input and output face  | 
Dimension Tolerance  | +/- 0.2mm  | 
Surface Quality  | 40-20 scratch and dig  | 
Surface Flatness  | λ/4 up to λ/8 @ 633 nm  | 
Transmitted Wavefront Error  | < λ/4 @ 633 nm  | 
Clear Aperture  | >80%  |